Change your IP Address in less than 1 Min

-

 How to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.


    Click on "Start" in the bottom left corner of the screen.
    Click on "RUN"
    Type in "command" and click OK


      You should be now at MSDOS prompt Screen

    Type "ipconfig /release" just like that, and press "enter"
    Type "exit" and leave the prompt
    Right-click on "Network Places" or "My Network Places" on your desktop.
    Click on "properties"


     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

     Right click on "Local Area Connection" and click "properties"
    Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
    Click on "Use the following IP address" under the "General" tab
    Create an IP address (It doesn't matter what it is)
    Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
    Press the "Ok" button here
    Hit the "Ok" button again


     Now you should be back to the "Local Area Connection" screen.

    Right-click back on "Local Area Connection" and go to properties again.
    Go back to the "TCP/IP" settings
    This time, select "Obtain an IP address automatically"
    Click on "Ok"
    Hit "Ok" again.
    Now you have a New IP address.

I hope you guys liked it.... 😎😎
#Like and #Share

 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.


  • Click on "Start" in the bottom left corner of the screen.
  • Click on "RUN"
  • Type in "command" and click OK

      You should be now at MSDOS prompt Screen

  • Type "ipconfig /release" just like that, and press "enter"
  • Type "exit" and leave the prompt
  • Right-click on "Network Places" or "My Network Places" on your desktop.
  • Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

  •  Right click on "Local Area Connection" and click "properties"
  • Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
  • Click on "Use the following IP address" under the "General" tab
  • Create an IP address (It doesn't matter what it is)
  • Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
  • Press the "Ok" button here
  • Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

  • Right-click back on "Local Area Connection" and go to properties again.
  • Go back to the "TCP/IP" settings
  • This time, select "Obtain an IP address automatically"
  • Click on "Ok"
  • Hit "Ok" again.
  • Now you have a New IP address.
- See more at: http://www.besthacking.in/2014/03/change-your-ip-in-less-then-1-minute.html#sthash.O7LGvuxh.dpuf
 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.


  • Click on "Start" in the bottom left corner of the screen.
  • Click on "RUN"
  • Type in "command" and click OK

      You should be now at MSDOS prompt Screen

  • Type "ipconfig /release" just like that, and press "enter"
  • Type "exit" and leave the prompt
  • Right-click on "Network Places" or "My Network Places" on your desktop.
  • Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

  •  Right click on "Local Area Connection" and click "properties"
  • Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
  • Click on "Use the following IP address" under the "General" tab
  • Create an IP address (It doesn't matter what it is)
  • Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
  • Press the "Ok" button here
  • Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

  • Right-click back on "Local Area Connection" and go to properties again.
  • Go back to the "TCP/IP" settings
  • This time, select "Obtain an IP address automatically"
  • Click on "Ok"
  • Hit "Ok" again.
  • Now you have a New IP address.
- See more at: http://www.besthacking.in/2014/03/change-your-ip-in-less-then-1-minute.html#sthash.O7LGvuxh.dpuf
 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.


  • Click on "Start" in the bottom left corner of the screen.
  • Click on "RUN"
  • Type in "command" and click OK

      You should be now at MSDOS prompt Screen

  • Type "ipconfig /release" just like that, and press "enter"
  • Type "exit" and leave the prompt
  • Right-click on "Network Places" or "My Network Places" on your desktop.
  • Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

  •  Right click on "Local Area Connection" and click "properties"
  • Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
  • Click on "Use the following IP address" under the "General" tab
  • Create an IP address (It doesn't matter what it is)
  • Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
  • Press the "Ok" button here
  • Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

  • Right-click back on "Local Area Connection" and go to properties again.
  • Go back to the "TCP/IP" settings
  • This time, select "Obtain an IP address automatically"
  • Click on "Ok"
  • Hit "Ok" again.
  • Now you have a New IP address.
- See more at: http://www.besthacking.in/2014/03/change-your-ip-in-less-then-1-minute.html#sthash.O7LGvuxh.dpuf
 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.


  • Click on "Start" in the bottom left corner of the screen.
  • Click on "RUN"
  • Type in "command" and click OK

      You should be now at MSDOS prompt Screen

  • Type "ipconfig /release" just like that, and press "enter"
  • Type "exit" and leave the prompt
  • Right-click on "Network Places" or "My Network Places" on your desktop.
  • Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

  •  Right click on "Local Area Connection" and click "properties"
  • Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
  • Click on "Use the following IP address" under the "General" tab
  • Create an IP address (It doesn't matter what it is)
  • Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
  • Press the "Ok" button here
  • Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

  • Right-click back on "Local Area Connection" and go to properties again.
  • Go back to the "TCP/IP" settings
  • This time, select "Obtain an IP address automatically"
  • Click on "Ok"
  • Hit "Ok" again.
  • Now you have a New IP address.
- See more at: http://www.besthacking.in/2014/03/change-your-ip-in-less-then-1-minute.html#sthash.O7LGvuxh.dpuf

Comments

  1. Unknown28 September 2017 at 11:33

    This comment has been removed by a blog administrator.

    ReplyDelete

Post a Comment

Popular posts from this blog

How to hack via bluetooth

-
Image
 HEy,   Today i am sharing very interesting trick  that  how to hack  Bluetooth hacking  software  well you all are familiar with a term of hacking and now a days the people who are unaware of hacking losses their important data,  credit card  numbers and lots of other thing which are valueable.Well today I am sharing an interesting piece of hacking.People are amazed when they see hacker access a mobile phone with the Bluetooth and multimedia phones .But let me tell you its very simple. There are various hacks and lot of software  already available on the different website which helps hackers to hack any cell phone and multimedia phones.In this post that I have outlined only Some  Bluetooth Hacking Software  and because these softwares are very effective to access any phone.  And now here comes some of the softwares list of Bluetooth hacking software.  1) Super Bluetooth Hack  (awesome so...
Read more

Top 5 dangerous notepad viruses

-
Image
SOME DANGEROUS AND DEADLY  TRICKS [CAUTION]   DO NOT TRY THESE FOR FUN!! 1. How to create more than 3,000 folders under a minute 1) Open your notepad and type the following code. @echo off :top md %random% goto top 2) Save it as 1000.bat @echo off makes your screen appear blank but it is actually making hundreds of folders. md %random% is command that creating folders with random names.( md is a command to make directory in ms-dos) goto top – return the command to :top, causes an infinite loop. NOTE: The folders will get created in the directory where you saved the ”1000.bat” file. The file might look suspicious to your friends . So if you are looking to fool your friends, then change the file name and also the icon so that he doesn’t suspect the file to be a virus.  ——————————————————————————— ——————————————————– 2. How to Shutdown a computer forever? Now Please don’t try this because this is the most simplest and deadliest hack fo...
Read more